Description
Overview
This WattCycle battery has a rated capacity of 100 Ah at 12.8 V nominal voltage. Its rated energy is 1280 Wh. It uses LiFePO4 cells.
Features
- Cycle life stated by the manufacturer: 15,000 cycles.
- Case size: DIN H8.
- Ingress protection IP67: dust-tight and protected against temporary immersion.
- Expansion: up to 4 batteries in parallel and 4 in series, as stated by the manufacturer.
Runtime and charging
- At a steady 100 W load, the rated energy lasts about 13 h. An inverter and the cabling add losses, so plan with a margin.
- Continuous discharge: up to 100 A, about 1280 W at nominal voltage. Keep inverters and other loads below this.
Installation
- Fit a fuse or circuit breaker close to the positive terminal and size the cables for 100 A of continuous current.
- Charge it at 14.4 V with a LiFePO4-compatible charger. For mains power see AC–DC battery chargers; for charging from a vehicle alternator see DC–DC battery chargers.
- Combine batteries in series or parallel only within the manufacturer’s limits, using identical batteries at the same state of charge.
- It is a deep-cycle battery: do not use it to start an engine unless the manufacturer rates this model for starting.
These figures are stated by the manufacturer, were checked by PVShop on 2026-09-12 and have not been independently tested. Delivery time and shipping cost are shown for your country before you order.
