Delivery is not available to this country. Please choose another destination.
← Back to shop

WattCycle 12V 100Ah Trolling Motor LiFePO4 Battery

€279.99

12 V · 100 Ah · 1280 Wh · LiFePO4 · 120 A BMS

ModelPVS-BAT-F22C84ADCE
Nominal system voltage
12 V
Rated capacity
100 Ah
Rated energy
1280 Wh
Cell chemistry
LiFePO4
Product weight
11.1 kg
Ingress protection rating
IP65
Download model datasheet (opens in a new tab)
SKU: PVS-BAT-F22C84ADCE Category:

Description

Overview

This WattCycle battery has a rated capacity of 100 Ah at 12 V nominal voltage. Its rated energy is 1280 Wh. It uses LiFePO4 cells. The manufacturer offers it for trolling motors.

Features

  • Cycle life stated by the manufacturer: 15,000 cycles.
  • Ingress protection IP65: dust-tight and protected against water jets.

Runtime and charging

  • At a steady 100 W load, the rated energy lasts about 13 h. An inverter and the cabling add losses, so plan with a margin.
  • Continuous discharge: up to 120 A, about 1440 W at nominal voltage. Keep inverters and other loads below this.
  • At the recommended charge current of 20 A, charging from empty takes roughly 5 h.

Installation

  • Fit a fuse or circuit breaker close to the positive terminal and size the cables for 120 A of continuous current.
  • Charge it with a LiFePO4-compatible charger at the voltage the manufacturer specifies. For mains power see AC–DC battery chargers; for charging from a vehicle alternator see DC–DC battery chargers.
  • It is a deep-cycle battery: do not use it to start an engine unless the manufacturer rates this model for starting.

These figures are stated by the manufacturer, were checked by PVShop on 2026-09-12 and have not been independently tested. Delivery time and shipping cost are shown for your country before you order.

Technical specifications

Supplier-stated — not independently tested

Selected model specifications

ModelPVS-BAT-F22C84ADCE
Our datasheetDownload PDF (opens in a new tab)
Battery & BMS
Rated capacity100 Ah
Rated energy1280 Wh
Cell chemistryLiFePO4
BMS continuous current rating120 A
Recommended charge current20 A
Physical & environmental
Product weight11.1 kg
Dimensions (L × W × H)260 × 168 × 209 mm
Ingress protection ratingIP65

Documentation & test conditions

Manufacturer product page and available manufacturer documents reviewed 2026-09-12. Values are manufacturer-stated and not independently laboratory tested by PVShop.

Evidence checked: